A toilet is one of the most basic needs of a human being. A toilet is available in every household. It is installed at the time of construction of the house. Now, there can be times when your toilet gets damaged or starts to disorientate.
You would have to call a professional to replace the toilet in such conditions. But, what if you could install a toilet bowl yourself, it could save you a lot of money as well as time. If you are looking for the same thing, you are at the right place.
How to install a toilet bowl?
To install a toilet bowl, you will need to have a certain set of tools that specialize in plumbing. Now, for the process, first, you have to install the soil pipe. Then you have to solder the stop valve. After that, you have to place the toilet wax ring on the soil pipe. Now, take the bowl and install it and place the tank on top of it. In the end, set up the supply lines, and you are done.
Further in this article, you will get a deeper idea about the installation of a toilet bowl. So, stick till the end.
Process of Installation of Toilet Bowl:
To install a toilet, you will have to follow some steps to do it perfectly. Otherwise, you could do something wrong with the toilet will irritate you in the long run. Also, it is always better to keep on the right track while doing any kind of thing because the result then will be perfect. So, without further ado, let’s get onto the process of installing a toilet;
1. Acquiring the Right Tools
Getting the right tools beforehand is always the best strategy while doing or installing anything because you do not want to have any mishaps later. Now, to install the toilet, you must get a certain set of tools necessary.
These tools include a propane torch, striker, tubing cutter, tubing bender tool, wrench, drill, hacksaw, jigsaw, handsaw, level, screwdriver, tape measure, and knife.
2. Getting the Soil Pipe Ready
Once you have all the tools, you can get onto the first step. You have to prepare the soil pipe in a way that it is not over or undersized. You have to keep its size comparable to the bowl and toilet flange to install them on the floor. That concludes the first step.
3. Installing the Flange and Fixing the Soil Pipe
The second step involves the fixing of the soil pipe and the toilet flange on the floor. You will have to use screws to fix it. Also, just to be completely safe, you need to apply some cement to the surrounding soil pipe and the flange. With this, you have laid the foundation for the toilet bowl.
4. Soldering the Stop Valve
A stop valve is the part of a toilet that stops the supply line in case of any malfunction. For this, you have to cut the supply line leaving almost 1m of the line for the stop valve to solder it. You can use the propane torch to solder the stop valve to the supply line.
5. Putting the Toilet Wax Ring
In the next step, you have to install the wax ring around the soil pipe that you previously installed. This component is to avoid any leakage of water from the toilet. You have to use screws to fix it with the soil pipe.
6. Installing the Bowl
For the next step, you have to install the toilet on top of the wax ring that you fixed with the soil pipe. For this, you have to take the toilet bowl and place it on the wax ring and push it until it reaches the floor.
Now, use bolts with nylon washers on them to fix the bowl to the wall. Be aware that tightening the bolts too much could damage that bowl. So, avoid that part.
7. Finishing
At the very least, you have to take the tank and place it on the bowl and fix it with the wall and the bowl using bolts and screws, Finally, open the supply line and the stop valve and try to flush the toilet for 6 times. This step is for checking leaks in the toilet.
Conclusion
In conclusion, installing a toilet bowl is not as hard a process as it seems to be. You just need to have a person with you, some tools, and basic knowledge of DIY stuff to install a toilet bowl.
With this, you will save yourself a good amount of money and also a very huge amount of time that is wasted in case of hiring a professional. So, what are you waiting for, go install your toilet now, if you need one?
For more plumbing services click here.
FAQs
Can I install toilets myself?
Yes, you can easily install a toilet yourself. You just need to have a little knowledge about DIY things. If you meet the qualifications, you will not only save money. Also, you will save a great deal of time. So, always go for yourself, if you know DIY to install a toilet. You will also get satisfaction and your mood will lift.
Is replacing a toilet bowl easy?
Most people make it sound very difficult to install a toilet for you. In reality, it is very easy. If you have the right tools, some time, basic knowledge about DIY, and an extra pair of hands, then you can easily install a toilet yourself. It is always best to get your work done yourself instead of going for a professional always.
Should you Caulk around a toilet?
Caulk is a part of the toilet that keeps your toilet from getting damaged and any kind of malfunctions. It also helps keep the toilet secured with the floor. Also, it could save you from injuries, if you fall near the toilet. So, it is always recommended to caulk around your toilet. The final choice is completely up to you. But, it will disturb you, if you do not do it.