5 Ways to Save Water in Your Toilet

Every homeowner wishes to save water in the toilet, but it is not as simple as it seems. The world is going through a phase of climate change in which nature will react unpredictably, and many unwanted issues like droughts can occur in the future. Therefore, optimizing the utility of natural resources is essential, and water is among the most crucial. 

For Plumbing Services

It is a stipulation of the evolving world to learn the art of saving water. Most modern plumbing equipment operates on the optimum use of water. But there is still a margin to preserve more water through using the human brain and the plumbing stationeries and equipment. 

The Importance of Saving Water in Toilet

Do you know the water you use in your home contains 30 percent usage from the toilet only? Toilets consume more water than cloth washing. On average, an adult person uses 100 gallons of water in the bathroom daily. 

In other words, a single person consumes 3000 gallons of water per month. These facts show the vitality of saving water in your toilet. This guide will help you enhance your knowledge of water-saving techniques in the toilet. 

How to Save Water in Your Toilet

It is crucial to learn how to save water in toilets and take part in preserving the natural commodity. Therefore, this section explains the methods to save water in toilets. 

Using Suitable Flapper

The flapper or the fill valve is responsible for cutting the water supply off when the toilet tank is full. It is also responsible for letting the water in after a flush occurs. Therefore, flappers are a crucial component in terms of saving water. 

People make mistakes by not choosing the right size for the flapper and waste approximately 4.4 gallons of water per flush. If you have selected the right size, but the flapper has aged and is leaking water or malfunctioning, you should replace the flapper immediately. Replacing the flapper with a new one can save 60 ounces of water per flush and 3000 gallons per anum. 

Detect and Fix the Leaks to Save Water

Water leaks are a significant issue in domestic setups, and homeowners hardly notice them in the initial stages. This practice can cause a water leakage of approximately 10000 gallons per home annually. 

Leaks can occur in the pipework, valves, or in the tank itself. It would help if you observed the pipes and valves to check for leakages. Similarly, do a test now and then with your toilet tank because leakages can cause more damage than anything else. Here is a simple test to check your toilet tank.


  •         Put a small quantity of harmless dye in your toilet tank.
  •         Wait for half an hour.
  •         After half an hour of observing the toilet bowl, if the bowl has the same colour floating in it, it indicates that the tank is leaking water. 
  •         This test will teach you how to save water in your toilet tank.

Do not let the Taps Open

It is a common worldwide practice to leave the taps running while washing hands and face after using the toilet. If you start counting, you will probably realize how much water you have wasted unnecessarily. 

It is essential to make good habits for saving water in the toilet. Similarly, we must save water in our bathrooms as well. Often we keep the taps running while washing or shaving the face. This unfortunate habit can cause the wastage of millions of gallons of water worldwide daily. 

Save Water in Your Toilet

Install a Toilet Tank Bank

Toilet tank banks are available in different sizes. These are water-saving reservoirs that have patented valves and do not leak water. These tank banks prevent the evaporation of water and preserve water in good condition. Using toilet tank banks can help you save water on a toilet flush

Dual Flush Toilet Conversion Kits

It is well-known that liquid wastes require less flushing water while solid wastes require more water. However, if you press the tank button to pour water, it sends the same quantity of water irrespective of the waste it has to flush. This conventional tank approach causes a waste of water.

The new dual-flush toilet conversion kit solves this problem by offering separate mechanisms for different kinds of flushes. If you press the lid to flush liquid waste, the tank will pour little water into the bowl. On the contrary, if you press the button to flush solid water, the tank will send more water into the bowl.


We should learn to save water in toilets to preserve reasonable quantities of water. Several preventive measures can help optimize water usage in your bathroom. We should check on them to keep the system in good condition and avoid water wastage.

Scroll to Top